CGAL::Polyhedron_3<Traits>

Definition

A polyhedral surface Polyhedron_3<Traits> consists of vertices V, edges E, facets F and an incidence relation on them. Each edge is represented by two halfedges with opposite orientations.

Halfedge Diagram

Vertices represent points in 3d-space. Edges are straight line segments between two endpoints. Facets are planar polygons without holes defined by the circular sequence of halfedges along their boundary. The polyhedral surface itself can have holes. The halfedges along the boundary of a hole are called border halfedges and have no incident facet. An edge is a border edge if one of its halfedges is a border halfedge. A surface is closed if it contains no border halfedges. A closed surface is a boundary representation for polyhedra in three dimensions. The convention is that the halfedges are oriented counterclockwise around facets as seen from the outside of the polyhedron. An implication is that the halfedges are oriented clockwise around the vertices. The notion of the solid side of a facet as defined by the halfedge orientation extends to polyhedral surfaces with border edges although they do not define a closed object. If normal vectors are considered for the facets, normals point outwards (following the right hand rule).

The strict definition can be found in [Ket99]. One implication of this definition is that the polyhedral surface is always an orientable and oriented 2-manifold with border edges, i.e., the neighborhood of each point on the polyhedral surface is either homeomorphic to a disc or to a half disc, except for vertices where many holes and surfaces with boundary can join. Another implication is that the smallest representable surface is a triangle (for polyhedral surfaces with border edges) or a tetrahedron (for polyhedra). Boundary representations of orientable 2-manifolds are closed under Euler operations. They are extended with operations that create or close holes in the surface.

Other intersections besides the incidence relation are not allowed, although they are not automatically handled, since self intersections are not easy to check efficiently. Polyhedron_3<Traits> does only maintain the combinatorial integrity of the polyhedral surface (using Euler operations) and does not consider the coordinates of the points or any geometric information.

The class Polyhedron_3<Traits> can represent polyhedral surfaces as well as polyhedra. The interface is designed in such a way that it is easy to ignore border edges and work only with polyhedra.

The sequence of edges can be ordered in the data structure on request such that the sequence starts with the non-border edges and ends with the border edges. Border edges are then itself ordered such that the halfedge which is incident to the facet comes first and the halfedge incident to the hole comes thereafter. This normalization step counts simultaneously the number of border edges. This number is zero if and only if the surface is a closed polyhedron. Note that this class does not maintain this counter nor the halfedge order during further modifications. There is no automatic caching done for auxiliary information.

#include <CGAL/Polyhedron_3.h>

Parameters

The full template declaration of Polyhedron_3<Traits> states four template parameters:

template < class PolyhedronTraits_3,
class PolyhedronItems_3 = CGAL::Polyhedron_items_3,
template < class T, class I> class HalfedgeDS = CGAL::HalfedgeDS_default,
class Alloc = CGAL_ALLOCATOR(int)>
class Polyhedron_3;

The first parameter requires a model of the PolyhedronTraits_3 concept as argument, for example CGAL::Polyhedron_traits_3. The second parameter expects a model of the PolyhedronItems_3 concept. By default, the class CGAL::Polyhedron_items_3 is preselected. The third parameter is a class template. A model of the HalfedgeDS concept is expected. By default, the class CGAL::HalfedgeDS_default is preselected, which is a list based implementation of the halfedge data structure. The fourth parameter Alloc requires a standard allocator for STL container classes. The rebind mechanism from Alloc will be used to create appropriate allocators internally. A default is provided with the macro CGAL_ALLOCATOR(int) from the <CGAL/memory.h> header file.

Types

Polyhedron_3<Traits>::Traits
traits class selected for PolyhedronTraits_3.

Polyhedron_3<Traits>::Items
items class selected for PolyhedronItems_3.

Polyhedron_3<Traits>::HalfedgeDS
instantiated halfedge data structure.


Polyhedron_3<Traits>::size_type
size type of HalfedgeDS.

Polyhedron_3<Traits>::difference_type
difference type of HalfedgeDS.

Polyhedron_3<Traits>::iterator_category
iterator category of HalfedgeDS for all iterators.

Polyhedron_3<Traits>::circulator_category
circulator category of all circulators; bidirectional category if the Items::Halfedge provides a prev() member function, otherwise forward category.

Polyhedron_3<Traits>::allocator_type
allocator type Alloc.


Polyhedron_3<Traits>::Vertex
vertex type.

Polyhedron_3<Traits>::Halfedge
halfedge type.

Polyhedron_3<Traits>::Facet
facet type.


Polyhedron_3<Traits>::Point_3
point stored in vertices.

Polyhedron_3<Traits>::Plane_3
plane equation stored in facets (if supported).

The following handles, iterators, and circulators have appropriate non-mutable counterparts, i.e., const_handle, const_iterator, and const_circulator. The mutable types are assignable to their non-mutable counterparts. Both circulators are assignable to the Halfedge_iterator. The iterators are assignable to the respective handle types. Wherever the handles appear in function parameter lists, the corresponding iterators can be used as well. For convenience, the Edge_iterator enumerates every other halfedge. It is based on the CGAL::N_step_adaptor class. For convenience, the Point_iterator enumerates all points in the polyhedral surface in the same order as the Vertex_iterator, but with the value type Point. It is based on the CGAL::Iterator_project adaptor. Similarly, a Plane_iterator is provided.

Polyhedron_3<Traits>::Vertex_handle
handle to vertex.

Polyhedron_3<Traits>::Halfedge_handle
handle to halfedge.

Polyhedron_3<Traits>::Facet_handle
handle to facet.


Polyhedron_3<Traits>::Vertex_iterator
iterator over all vertices.

Polyhedron_3<Traits>::Halfedge_iterator
iterator over all halfedges.

Polyhedron_3<Traits>::Facet_iterator
iterator over all facets.


Polyhedron_3<Traits>::Halfedge_around_vertex_circulator
circulator of halfedges around a vertex (cw).

Polyhedron_3<Traits>::Halfedge_around_facet_circulator
circulator of halfedges around a facet (ccw).


Polyhedron_3<Traits>::Edge_iterator
iterator over all edges (every other halfedge).

Polyhedron_3<Traits>::Point_iterator
iterator over all points.

Polyhedron_3<Traits>::Plane_iterator
iterator over all plane equations.


begin of advanced section  advanced  begin of advanced section

Types for Tagging Optional Features

The following types are equal to either CGAL::Tag_true or CGAL::Tag_false, depending on whether the named feature is supported or not.

Polyhedron_3<Traits>::Supports_vertex_halfedge
Vertex::halfedge().

Polyhedron_3<Traits>::Supports_vertex_point
Vertex::point().

Polyhedron_3<Traits>::Supports_halfedge_prev
Halfedge::prev().

Polyhedron_3<Traits>::Supports_halfedge_vertex
Halfedge::vertex().

Polyhedron_3<Traits>::Supports_halfedge_facet
Halfedge::facet().

Polyhedron_3<Traits>::Supports_facet_halfedge
Facet::halfedge().

Polyhedron_3<Traits>::Supports_facet_plane
Facet::plane().

Polyhedron_3<Traits>::Supports_removal
supports removal of individual elements.

end of advanced section  advanced  end of advanced section

Creation

Polyhedron_3<Traits> P ( Traits traits = Traits());

Polyhedron_3<Traits> P ( size_type v,
size_type h,
size_type f,
Traits traits = Traits());
a polyhedron P with storage reserved for v vertices, h halfedges, and f facets. The reservation sizes are a hint for optimizing storage allocation.

void P.reserve ( size_type v, size_type h, size_type f)
reserve storage for v vertices, h halfedges, and f facets. The reservation sizes are a hint for optimizing storage allocation. If the capacity is already greater than the requested size nothing happens. If the capacity changes all iterators and circulators might invalidate.

Halfedge_handle P.make_tetrahedron ()
a tetrahedron is added to the polyhedral surface. Returns a halfedge of the tetrahedron.

Halfedge_handle
P.make_tetrahedron ( Point p1,
Point p2,
Point p3,
Point p4)
a tetrahedron is added to the polyhedral surface with its vertices initialized to p1, p2, p3, and p4. Returns that halfedge of the tetrahedron which incident vertex is initialized to p1. The incident vertex of the next halfedge is p2, and the vertex thereafter is p3. The remaining fourth vertex is initialized to p4.

Halfedge_handle P.make_triangle () a triangle with border edges is added to the polyhedral surface. Returns a non-border halfedge of the triangle.

Halfedge_handle P.make_triangle ( Point p1, Point p2, Point p3)
a triangle with border edges is added to the polyhedral surface with its vertices initialized to p1, p2, and p3. Returns that non-border halfedge of the triangle which incident vertex is initialized to p1. The incident vertex of the next halfedge is p2, and the vertex thereafter is p3.

Access Member Functions

bool P.empty () returns true if P is empty.

size_type P.size_of_vertices ()
number of vertices.
size_type P.size_of_halfedges ()
number of halfedges (incl. border halfedges).
size_type P.size_of_facets ()
number of facets.

size_type P.capacity_of_vertices ()
space reserved for vertices.
size_type P.capacity_of_halfedges ()
space reserved for halfedges.
size_type P.capacity_of_facets ()
space reserved for facets.

size_t P.bytes () bytes used for the polyhedron.
size_t P.bytes_reserved ()
bytes reserved for the polyhedron.

allocator_type P.get_allocator () allocator object.

Vertex_iterator P.vertices_begin ()
iterator over all vertices.
Vertex_iterator P.vertices_end () past-the-end iterator.
Halfedge_iterator P.halfedges_begin ()
iterator over all halfedges.
Halfedge_iterator P.halfedges_end () past-the-end iterator.
Facet_iterator P.facets_begin () iterator over all facets (excluding holes).
Facet_iterator P.facets_end () past-the-end iterator.

Edge_iterator P.edges_begin () iterator over all edges.
Edge_iterator P.edges_end () past-the-end iterator.

Point_iterator P.points_begin () iterator over all points.
Point_iterator P.points_end () past-the-end iterator.

Plane_iterator P.planes_begin () iterator over all plane equations.
Plane_iterator P.planes_end () past-the-end iterator.

Traits P.traits () returns the traits class.

Combinatorial Predicates

bool P.is_closed () returns true if there are no border edges.

bool P.is_pure_bivalent ()
returns true if all vertices have exactly two incident edges.

bool P.is_pure_trivalent ()
returns true if all vertices have exactly three incident edges.

bool P.is_pure_triangle ()
returns true if all facets are triangles.

bool P.is_pure_quad () returns true if all facets are quadrilaterals.

bool P.is_triangle ( Halfedge_const_handle h)
true iff the connected component denoted by h is a triangle.

bool P.is_tetrahedron ( Halfedge_const_handle h)
true iff the connected component denoted by h is a tetrahedron.

Euler Operators (Combinatorial Modifications)

The following Euler operations modify consistently the combinatorial structure of the polyhedral surface. The geometry remains unchanged.

Euler Operator: Facet

Halfedge_handle P.split_facet ( Halfedge_handle h, Halfedge_handle g)
splits the facet incident to h and g into two facets with a new diagonal between the two vertices denoted by h and g respectively. The second (new) facet is a copy of the first facet. Returns h->next() after the operation, i.e., the new diagonal. The new face is to the right of the new diagonal, the old face is to the left. The time is proportional to the distance from h to g around the facet.
Precondition: h and g are incident to the same facet. h != g (no loops). h->next() != g and g->next() != h (no multi-edges).

Halfedge_handle P.join_facet ( Halfedge_handle h)
joins the two facets incident to h. The facet incident to h->opposite() gets removed. Both facets might be holes. Returns the predecessor of h around the facet. The invariant join_facet( split_facet( h, g)) returns h and keeps the polyhedron unchanged. The time is proportional to the size of the facet removed and the time to compute h->prev().
Precondition: The degree of both vertices incident to h is at least three (no antennas).
Requirement: Supports_removal CGAL::Tag_true.

Euler Operator: Vertex

Halfedge_handle P.split_vertex ( Halfedge_handle h, Halfedge_handle g)
splits the vertex incident to h and g into two vertices, the old vertex remains and a new copy is created, and connects them with a new edge. Let hnew be h->next()->opposite() after the split, i.e., a halfedge of the new edge. The split regroups the halfedges around the two vertices. The halfedge sequence hnew, g->next()->opposite(), ..., h remains around the old vertex, while the halfedge sequence hnew->opposite(), h->next()->opposite() (before the split), ..., g is regrouped around the new vertex. The split returns hnew, i.e., the new halfedge incident to the old vertex. The time is proportional to the distance from h to g around the vertex.
Precondition: h and g are incident to the same vertex. h != g (antennas are not allowed).
Note: A special application of the split is split_vertex(h,h->next()->opposite()) which is equivalent to an edge split of the halfedge h->next() that creates a new vertex on the halfedge h->next(). See also split_edge(h) below.

Halfedge_handle P.join_vertex ( Halfedge_handle h)
joins the two vertices incident to h. The vertex denoted by h->opposite() gets removed. Returns the predecessor of h around the vertex, i.e., h->opposite()->prev(). The invariant join_vertex( split_vertex( h, g)) returns h and keeps the polyhedron unchanged. The time is proportional to the degree of the vertex removed and the time to compute h->prev() and h->opposite()->prev().
Precondition: The size of both facets incident to h is at least four (no multi-edges).
Requirement: Supports_removal CGAL::Tag_true.

Halfedge_handle P.split_edge ( Halfedge_handle h)
splits the halfedge h into two halfedges inserting a new vertex that is a copy of h->opposite()->vertex(). Is equivalent to split_vertex( h->prev(), h->opposite()). The call of prev() can make this method slower than a direct call of split_vertex() if the previous halfedge is already known and computing it would be costly when the halfedge data structure does not support the prev() member function. Returns the new halfedge hnew pointing to the inserted vertex. The new halfedge is followed by the old halfedge, i.e., hnew->next() == h.

Halfedge_handle P.flip_edge ( Halfedge_handle h)
performs an edge flip. It returns h after rotating the edge h one vertex in the direction of the face orientation.
Precondition: h != Halfedge_handle() and both facets incident to h are triangles.

Euler Operator: Center Vertex

Halfedge_handle P.create_center_vertex ( Halfedge_handle h)
barycentric triangulation of h->facet(). Creates a new vertex, a copy of h->vertex(), and connects it to each vertex incident to h->facet() splitting h->facet() into triangles. h remains incident to the original facet, all other triangles are copies of this facet. Returns the halfedge h->next() after the operation, i.e., a halfedge pointing to the new vertex. The time is proportional to the size of the facet.
Precondition: h is not a border halfedge.

Halfedge_handle P.erase_center_vertex ( Halfedge_handle g)
reverses create_center_vertex. Erases the vertex pointed to by g and all incident halfedges thereby merging all incident facets. Only g->facet() remains. The neighborhood of g->vertex() may not be triangulated, it can have larger facets. Returns the halfedge g->prev(). Thus, the invariant h == erase_center_vertex( create_center_vertex(h)) holds if h is not a border halfedge. The time is proportional to the sum of the size of all incident facets.
Precondition: None of the incident facets of g->vertex() is a hole. There are at least two distinct facets incident to the facets that are incident to g->vertex(). (This prevents the operation from collapsing a volume into two facets glued together with opposite orientations, such as would happen with any vertex of a tetrahedron.)
Requirement: Supports_removal CGAL::Tag_true.

Euler Operators Modifying Genus

Euler Operator: Loop

Halfedge_handle
P.split_loop ( Halfedge_handle h,
Halfedge_handle i,
Halfedge_handle j)
cuts the polyhedron into two parts along the cycle (h,i,j) (edge j runs on the backside of the three dimensional figure above). Three new vertices (one copy for each vertex in the cycle) and three new halfedges (one copy for each halfedge in the cycle), and two new triangles are created. h,i,j will be incident to the first new triangle. The return value will be the halfedge incident to the second new triangle which is the copy of h-opposite().
Precondition: h,i,j denote distinct, consecutive vertices of the polyhedron and form a cycle: i.e., h->vertex() == i->opposite()->vertex(), ..., j->vertex() == h->opposite()->vertex(). The six facets incident to h,i,j are all distinct.

Halfedge_handle P.join_loop ( Halfedge_handle h, Halfedge_handle g)
glues the boundary of the two facets denoted by h and g together and returns h. Both facets and the vertices along the facet denoted by g gets removed. Both facets may be holes. The invariant join_loop( h, split_loop( h, i, j)) returns h and keeps the polyhedron unchanged.
Precondition: The facets denoted by h and g are different and have equal degree (i.e., number of edges).
Requirement: Supports_removal CGAL::Tag_true.

Modifying Facets and Holes

Halfedge_handle P.make_hole ( Halfedge_handle h)
removes the incident facet of h and changes all halfedges incident to the facet into border edges. Returns h. See erase_facet(h) for a more generalized variant.
Precondition: None of the incident halfedges of the facet is a border edge.
Requirement: Supports_removal CGAL::Tag_true.

Halfedge_handle P.fill_hole ( Halfedge_handle h)
fills a hole with a newly created facet. Makes all border halfedges of the hole denoted by h incident to the new facet. Returns h.
Precondition: h.is_border().

Modifying Facets and Holes: add_vertex_and_facet_to_border()

Halfedge_handle
P.add_vertex_and_facet_to_border ( Halfedge_handle h,
Halfedge_handle g)
creates a new facet within the hole incident to h and g by connecting the tip of g with the tip of h with two new halfedges and a new vertex and filling this separated part of the hole with a new facet, such that the new facet is incident to g. Returns the halfedge of the new edge that is incident to the new facet and the new vertex.
Precondition: h->is_border(), g->is_border(), h != g, and g can be reached along the same hole starting with h.

Modifying Facets and Holes: add_facet_to_border()

Halfedge_handle
P.add_facet_to_border ( Halfedge_handle h,
Halfedge_handle g)
creates a new facet within the hole incident to h and g by connecting the vertex denoted by g with the vertex denoted by h with a new halfedge and filling this separated part of the hole with a new facet, such that the new facet is incident to g. Returns the halfedge of the new edge that is incident to the new facet.
Precondition: h->is_border(), g->is_border(), h != g, h->next() != g, and g can be reached along the same hole starting with h.

Erasing

void P.erase_facet ( Halfedge_handle h)
removes the incident facet of h and changes all halfedges incident to the facet into border edges or removes them from the polyhedral surface if they were already border edges. If this creates isolated vertices they get removed as well. See make_hole(h) for a more specialized variant.
Precondition: h->is_border() == false.
Requirement: Supports_removal CGAL::Tag_true.

void P.erase_connected_component ( Halfedge_handle h)
removes the vertices, halfedges, and facets that belong to the connected component of h.
Requirement: Supports_removal CGAL::Tag_true.

void P.clear () removes all vertices, halfedges, and facets.

Operations with Border Halfedges


begin of advanced section  advanced  begin of advanced section

Halfedges incident to a hole are called border halfedges. An halfedge is a border edge if itself or its opposite halfedge are border halfedges. The only requirement to work with border halfedges is that the Halfedge class provides a member function is_border() returning a bool. Usually, the halfedge data structure supports facets and a NULL facet pointer will indicate a border halfedge, but this is not the only possibility. The is_border() predicate divides the edges into two classes, the border edges and the non-border edges. The following normalization reorganizes the sequential storage of the edges such that the non-border edges precede the border edges, and that for each border edge the latter one of the two halfedges is a border halfedge (the first one is a non-border halfedge in conformance with the polyhedral surface definition). The normalization stores the number of border halfedges and the halfedge iterator the border edges start at within the data structure. Halfedge insertion or removal and changing the border status of a halfedge invalidate these values. They are not automatically updated.

void P.normalize_border ()
sorts halfedges such that the non-border edges precede the border edges. For each border edge the halfedge iterator will reference the halfedge incident to the facet right before the halfedge incident to the hole.

size_type P.size_of_border_halfedges ()
number of border halfedges.
Precondition: last normalize_border() call still valid, see above.

size_type P.size_of_border_edges ()
number of border edges. Since each border edge of a polyhedral surface has exactly one border halfedge, this number is equal to size_of_border_halfedges().
Precondition: last normalize_border() call still valid, see above.

Halfedge_iterator P.border_halfedges_begin ()
halfedge iterator starting with the border edges. The range [halfedges_begin(), border_halfedges_begin()) denotes all non-border halfedges. The range [border_halfedges_begin(), halfedges_end()) denotes all border edges.
Precondition: last normalize_border() call still valid, see above.

Edge_iterator P.border_edges_begin ()
edge iterator starting with the border edges. The range [edges_begin(), border_edges_begin()) denotes all non-border edges. The range [border_edges_begin(), edges_end()) denotes all border edges.
Precondition: last normalize_border() call still valid, see above.

end of advanced section  advanced  end of advanced section

Miscellaneous

void P.inside_out () reverses facet orientations (incl. plane equations if supported).

bool P.is_valid ( bool verbose = false, int level = 0)
returns true if the polyhedral surface is combinatorially consistent. If verbose is true, statistics are printed to cerr. For level == 1 the normalization of the border edges is checked too. This method checks in particular level 3 of CGAL::Halfedge_data_structure_decorator::is_valid from page 11.5 and that each facet is at least a triangle and that the two incident facets of a non-border edge are distinct.

bool P.normalized_border_is_valid ( bool verbose = false)
returns true if the border halfedges are in normalized representation, which is when enumerating all halfedges with the iterator: The non-border edges precede the border edges and for border edges, the second halfedge is the border halfedge. The halfedge iterator border_halfedges_begin() denotes the first border edge. If verbose is true, statistics are printed to cerr.


begin of advanced section  advanced  begin of advanced section
void P.delegate ( CGAL::Modifier_base<HDS>& m)
calls the operator() of the modifier m. See CGAL::Modifier_base in the Support Library Manual for a description of modifier design and its usage.
Precondition: The polyhedral surface must be valid when the modifier returns from execution.
end of advanced section  advanced  end of advanced section

See Also

CGAL::Polyhedron_3<Traits>::Vertex
CGAL::Polyhedron_3<Traits>::Halfedge
CGAL::Polyhedron_3<Traits>::Facet
PolyhedronTraits_3
CGAL::Polyhedron_traits_3<Kernel>
PolyhedronItems_3
CGAL::Polyhedron_items_3
HalfedgeDS
CGAL::HalfedgeDS_default
CGAL::Polyhedron_incremental_builder_3<HDS>
CGAL::Modifier_base in the Support Library Reference Manual.

Example

This example program instantiates a polyhedron using the default traits class and creates a tetrahedron.

// file: examples/Polyhedron/polyhedron_prog_simple.C

#include <CGAL/Simple_cartesian.h>
#include <CGAL/Polyhedron_3.h>

typedef CGAL::Simple_cartesian<double>     Kernel;
typedef CGAL::Polyhedron_3<Kernel>         Polyhedron;
typedef Polyhedron::Halfedge_handle        Halfedge_handle;

int main() {
    Polyhedron P;
    Halfedge_handle h = P.make_tetrahedron();
    if ( P.is_tetrahedron(h))
        return 0;
    return 1;
}